A Media Driver Is Missing Windows 10 Install

What is a media driver

  1. I am trying to install Windows 10 on a VirtualBox Version 5.2.8 r121009 host running on a Mac Mini Mid 2010 running MacOS High Sierra version 10.13.3. As soon as the windows install starts it pops up a window asking to load a driver. It says:'A media driver your computer needs is missing'. I load VBoxGuestAdditions.iso in the virtual optical drive.
  2. A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step.
  3. New Windows 10 Install And Missing Driver in Drivers and Hardware Hi, I just installed Windows 10 on my aging Dell Inspiron 1720 labtop. Everything worked fine but after viewing the device manager I see there is one missing driver.
  4. Windows 10 clean install 'A media driver is missing’ Changing BIOS setting: Disable Legacy USB support (Resulted in boot option not showing up) Updating bios.

Summary :

When I wanted to reinstall Windows later, I remade the bootable drive, but without setting the above option, because it takes a very long time. Then Windows installation on the new computer complained about the missing media driver every time I tried to install it.

If you are installing Windows 10 via an installation medium, you may get the error message saying “a media driver your computer needs is missing”. Well then, how can you fix the Windows media driver missing issue? Get the solutions from this post from MiniTool.

A Media Driver Is Missing Windows 10

Most users upgrade to Windows 10 directly via Windows update rather than depending on installation media like USB, CD or DVD. However, some users still choose to install the operating system using a USB drive, DVD or CD disc. Perhaps you are one of them.

Unfortunately, during the installation process, an error occurs with the message “A media driver your computer needs is missing. This could be a DVD, USB or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now.

Windows 10 media driver missing is a common error. Additionally, it can also happen in the Windows 7 installation process along with the error “A required CD/DVD drive device driver is missing”.

A Media Driver Is Missing Windows 10 Install Error

Why does the issue - Windows 10 install missing driver happen? The problem can be triggered by corrupted ISO media or DVD drive, missing USB or DVD driver, malfunctioning USB drive or port, etc.

In the following part, we will give you some solutions to fix this problem effectively.

Windows 10 reset VS clean install VS fresh start, what’s the difference? Read this post to learn them and choose a proper one for OS reinstallation.

Re-plug the USB Drive or Plug It to Another USB Port

If you get “a media driver your computer needs is missing” while using a USB drive, you can re-plug it or plug it to another USB port.

  1. When seeing the error message, click Cancel. Windows installation will return back.
  2. Disconnect your USB drive and then plug it again to the same port or another port.
  3. Repeat the Windows installation.

Check the Requirements for Windows 10

You should make sure your machine meets the system requirements for Windows 10. To get proper processing power, the system’s parameters should be more than the minimum requirements.

Change the Format of the ISO File

It is likely that the ISO file in the installation media is corrupted, leading to the missing media driver error. To troubleshoot the issue, you can change the ISO file format.

Just double-click the extracted setup from the ISO file. If it is in NTFS format, extract the file in FAT32 format and install Windows 10 again.

Check the Settings of BIOS

If these methods don’t work for you, perhaps the issue is related to the settings of the BIOS itself. So, you should do a check.

  1. Check if the USB 3.0 settings are set to Auto in BIOS.
  2. Check whether the Legacy USB and Legacy BIOS settings are set to disable.
  3. Check if your machine is not using the SATA mode. Usually, you can go to Advanced (or Storage Configuration, Drive Configuration, IDE Configuration), navigate to SATA Mode (or Set SATA As, SATA Configuration) and change its option to IDE, Compatible or ATA.
Tip: How can you go to BIOS to check these settings? This post - How to Enter BIOS Windows 10/8/7 (HP/Asus/Dell/Lenovo, any PC) will be helpful for you.

After changing the BIOS setting, save the change and then try installing Windows 10 again to check if the Windows 10 media driver missing issue is resolved.

The End

A Media Driver Your Computer Needs Is Missing Windows 10 Install Amd

Is your computer showing the error message “a media driver your computer needs is missing” when you perform a clean install of Windows 10? Now, after trying these methods above, we believe that you have successfully fixed your issue easily.

A Media Driver Is Missing Windows 10 Install

I am trying to create a Windows 10 installation media for my Dell XPS 9550 PC. I prefer to install clean windows 10 installation than Dell’s windows 10 images. Though I used my dell laptop, most of the steps are common for all drivers.

A Media Driver Is Missing Windows 10 Install Disk

  1. Get a clean Windows 10 media (This step can be ignored if you already have windows 10 install USB)
    1. Download and run media creation tool from below link
    2. Follow the images to create windows installation media

      Get a clean Windows 10 media (This step can be ignored if you already have windows 10 install USB)

  2. Download the drivers that you are planned to add. In my case I am adding wifi driver to my installation media. Download and extract contents from manufacture sites, my case it looks like below
  3. Convert install.esd to install.wim and add drivers to install.wim file
    1. Run Command Prompt as administrator
    2. excute following commands
      1. dism /Get-Wiminfo /Wimfile:f:/sources/install.esd (f: is my windows media usb drive)
      2. If the above command is okay, you will see something like this
      3. dism /export-image /SourceImageFile:f:/sources/install.esd /SourceIndex:1 /DestinationImageFile:install.wim /Compress:max /CheckIntegrity
      4. In the above command, my windows version is pro so I chose “1” for SourceIndex (Refer step 1 output to chose the right index). Above command take few minutes to create wim file, if successful, it screen looks like below
      5. Dism /mount-wim /wimfile:install.wim /index:1 /mountdir:e:mount (where e:mount is a empty folder in my local drive)
      6. dism /image:'e:mount' /add-driver /driver:'E:driverswifiDriversWinThreshWLx64bcmwdidhdpcie.inf'
      7. dism /unmount-wim /Mountdir:e:mount /commit
  4. Delete install.esd file from “sources” folder in installation media and replace that with install.wim file.
  5. Done. Now we are good to proceed with installation

Install Missing Drivers Free

Warning : Make sure you have another backup disk/media in case if installation fails

Comments are closed.