Ge Universal Remote 94927 Codes



We provided instructions to operate the remote, there are methods to program a universal remote control with your devices by using the specific tv codes for universal remote. So follow the below steps if you already have the three digit or four digit or the five digit universal remote control codes with you then you can follow the below procedure. Date: AUTHOR: flumunti Instructions and code for ge universal remote rc24914-e GE UNIVERSAL REMOTE INSTRUCTIONS Below you will find the generic instructions for the majority of our GE Universal Remotes for Manually Entering Codes, Using the Code. Qobubnwhcvi - Ge Universal Remote Rc24914 E Codes Ge Universal Remote Codes. Remote will re-send the first code of the 10 codes from Step 4. The red light will blink once and remain on. Auto Code Search The Auto Code Search is a process where you can search through all the codes stored in the remote to find a code for your device. It is recommended that you read through all the steps below to familiarize yourself with.

The GE universal remote control can be used to program not just a TV, but DVD player and other gadgets. To program a GE universal remote to a TV, you will need the GE universal remote codes. The codes are outlined in this other post. What about in a situation where you don’t want to go through the stress of trying out a bunch of remote codes? You can program your GE universal remote without codes. All you have to do is to follow the steps outlined in this post. The good thing is that, you only have to do this once. That is the first time you want to use your GE universal remote on your TV and other gadgets. For subsequent use, you don’t have to go through this process. So let’s get started.

How To Program GE Universal Remote Without Codes ( Code Search Method)

Step 1. Ensure that you turn on the gadget

Step 2. Hold your GE Universal remote control close to your TV (or any other gadget you want to program).

Step 3. Find the ‘Set Up’ button on your GE remote. Press and hold the button until the tiny LED button on your remote turns on.

Step 4. Find the correct Component button of your device and press it. These are the Component buttons. TV for Television. DVD for a DVD player. CBL for Cable box. Press the button that applies to your device.

Step 5. Continue to press and release the ‘Power’ button on your remote until the device turns off. As you press the button, the remote is going through the database of codes to find the right code for your device and brand. So you may have to press the button for a while to get the correct code. Once your device turns off, it means the correct code has been found.

Ge Universal Remote Jc022 Codes

Step 6. The next step is to save the code in the database. Press the ‘Enter’ button on your remote for the code to be saved.

Step 7. Finally, press the ‘Power’ button again to save the code you found.

How To Program GE Universal Remote Without Codes (Number Search Method)

Step 1. Ensure that you turn on the gadget

Ge Universal Remote 24944 Code List

Step 2. Hold your GE Universal remote control close to your TV (or any other gadget you want to program).

Step 3. Find the ‘Setup’ button on your GE remote. Press and hold the button until the tiny LED button on your remote turns on.

Ge Universal Remote 94927 Codes 10%

Step 4. Find the correct Component button of your device and press it. These are the Component buttons. TV for Television. DVD for a DVD player. CBL for Cable box. Press the button that applies to your device.

Step 5. Using the number buttons on your GE remote, press the number 9-9-1.

Step 6. Press and hold down the Channel+ and Power Buttons together until your device turns off.

Ge Universal Remote 94927 Codes

Step 7. The next step is to save the code in the database. Press the ‘Enter’ button on your remote for the code to be saved.

Step 8. Finally, press the ‘Power’ button again to save the code you found.

How To Program GE Universal Remote Using Codes

Step 1. Ensure that you turn on the gadget

Step 2. Hold your GE Universal remote control close to your TV (or any other gadget you want to program).

Step 3. Find the ‘Set Up’ button on your GE remote. Press and hold the button until the tiny LED button on your remote turns on.

Step 4. Find the correct Component button of your device and press it. These are the Component buttons. TV for Television. DVD for DVD player. CBL for Cable box. Press the button that applies to your device.

Step 5. Go through this post and find the correct code for your device. Enter the code using the number button on your remote. The tiny LED light will blink twice and your device will turn off if you enter the correct code. If not, try the next code.

Step 6. The next step is to save the code in the database. Press the ‘Enter’ button on your remote for the code to be saved.

Step 7. Finally, press the ‘Power’ button again to save the code you found.

The following page was printed from RemoteCentral.com:

These instructions and codes are valid for the GE RM94927, RM94926, RM94925, RM94905, RM94904, RM94903, RM94902 & RM94901 model remote controls.

How to enter device codes:
  1. Manually turn on the device you would like to control.
  2. Press and hold the [CODE SEARCH] button until the LED lights.
  3. Press and release the button that corresponds to the device you want to program. The LED will blink and then remain lit.
  4. Enter the three-digit code number using the keypad. After the code is entered, the LED will turn off. If the code is not valid the LED will blink; try again.
  5. Test the code by pointing at your device and pressing the [POWER] button. If your device does not respond, try the other codes. If none work, try the Code Search method described below.
To enter codes for the Audio or Aux devices (RM94927, RM94926 or RM94925 only):
If you have not already programmed the AUX button for an audio device, you can assign a second TV, VCR, DVD, CD, Satellite or Cable Box.
  1. Manually turn on the device you would like to control.
  2. Press and hold the [CODE SEARCH] button until the LED lights.
  3. Press and release the button that corresponds to the device you want to program. The LED will blink and then remain lit.
  4. Next, press the button for the device you want to program (TV, VCR, SAT, DVD). Press DBS for a cable box and DVD for a CD player.
  5. Enter the three-digit code number using the keypad. After the code is entered, the LED will turn off. If the code is not valid the LED will blink; try again.
  6. Test the code by pointing at your device and pressing the [POWER] button. If your device does not respond, try the other codes. If none work, try the Code Search method described below.
To use the code search function:
  1. Manually turn on the device you would like to control.
  2. Press and hold the [CODE SEARCH] button until the LED lights.
  3. Press and release the button that corresponds to the device you want to program. The LED will blink and then remain lit. (For programming a different type of device to the AUX button, follow this by pressing the type of device as described above).
  4. Press the [ON/OFF] button until your device turns off.
  5. When it does, press the [ENTER] button. The LED will turn off.
To read back the programmed code:
  1. Press and hold the [CODE SEARCH] button until the LED lights.
  2. Press and release the button that corresponds to the device you want to read the code from. The LED will blink once. (For the AUX button, follow this with the type of programmed device as described above).
  3. Press and release the [CODE SEARCH] button. The LED will turn off.
  4. Starting with 0 on the keypad, press the number buttons in order until the LED blinks. This is the first number. Repeat this step until you have retrieved all three digits of the code.
Sleep Timer:
The Sleep Function will turn off your TV after a designated amount of time, from 1 to 99 minutes.
  1. Press and hold the [SLEEP] button until the LED lights.
  2. Enter the time in minutes on the keypad, from 01 to 99 minutes.
  3. Leave the remote aimed at your television.
To Cancel the Sleep Timer:
  1. Press and hold the [SLEEP] button until the LED blinks, or
  2. Press the [ON/OFF] button, turning your television off.

Codes for RM94927, RM94926, RM94925, RM94905, RM94904, RM94903, RM94902 & RM94901:

| Cable Boxes | Televisions | VCRs |


RM94927, RM94926 & RM94925:

| CD Players | DVD Players | LD Players |
| Receivers | Satellite Receivers |





Comments are closed.