Minelab Explorer Xs Programs



MINELAB EXPLORER XS BY Marc Pontician. I have been using the Minelab Explorer XS now for about a year. I have put it through its paces, in sand (dry and wet), in the rain, in the wind, in hard packed soil, in highly mineralized coal soil, in the ice cold, to the deathly hot swealtering days of summer, from morning to night, and yes, even in the. Minelab Explorer XS is in good working condition. The detector has been sprayed black and looks not bad. On this explorer you can run the coil wire up the shaft or you can. The black coil has the rubber coming off the wire.Done hurt it in anyway.

Manual


EXPLORER XS & S

The benchmark for Coin and Treasure Hunting detectors is about to change with the introduction of the new Minelab Explorer. Operating on a totally new system call Full Band Spectrum (FBS), this new technology transmits up to 28 frequencies simultaneously, ranging from 1.5 kHz to 100 kHz, improving both depth and accuracy of discrimination. For the first time ever, here is a detector with 2-D Identification, which means that targets are now identified by not only conductivity but as well its ferrous content. There are two models, the Explorer S and the Explorer XS. Both detectors use the new Smartfind™ two-dimensional discrimination system and have equal depth. The Explorer XS however has a number of more advanced features which allows the operator to personalize the discrimination pattern to their requirements.

Minelab Explorer XS and Explorer S Multiple Frequency Detectors

By increasing the number and the range of frequencies being transmitted (the Explorer operates between the frequencies 1.5kHz to 100kHz), there has been a marked improvement in both the depth and accuracy of discrimination. This means that the Explorer can now detect those very deep targets which have been overlooked until now. All those productive areas you have detected previously, done well and found all that was there in shallow depths, can now be re-detected to find the deeper coins which were missed previously.

An added advantage of increasing the number of frequencies being transmitted is the increased accuracy of target identification. The more frequencies sampling the target, the more information returned for processing and the more precisely the detector is able to accurately identify the target. For the technically minded, Full Band Spectrum ( F.B.S.) has meant that the resolution or the divisions of measurement, the Explorer is able to make of a target signal has gone from approximately 8000 out to a massive 65000, a huge increase of information. They're New! They're Different! The new Minelab Explorers are the most technologically advanced detectors ever produced!

Minelab's powerful, high-performance Explorer series sets the new standard in metal detecting technology. Minelab's latest, exclusive Full Band Spectrum (FBS) technology features 28 simultaneous operating frequencies from 1.5kHz to 100kHz. Superior FBS technology means a wider variety of more desirable targets, incredible depth and more target information in your hands to help you find what you've been missing with other detectors!

Put the power of the Explorer to work! Start hunting within seconds of turning on the Explorer XS. Use Quickstart factory presets or adjust individual functions, sensitivity, volume, discrimination, pinpoint, etc., just by pushing a button, it's easy! In Advanced mode the combinations are almost endless, resulting in the world's most advanced metal detector!

Explorer

The deep penetrating submersible 10-inch all-weather search coil has its concealed cable running inside the fully adjustable square-section shaft. Just one of the innovative new features of this superbly crafted, rugged, yet sleek all new detector.

Minelab Explorer Xs Battery

Minelab's Explorers are an impressive combination of breakthrough technology and ease of use.

Minelab Explorer Xs Programs Reviews

The dynamic fully integrated control panel incorporates breakthrough technology with a full function Coordinate Target Identification (CTI) digital display system featuring Minelab's exclusive Smartfind.

Minelab Explorer Xs Review

Smartfind does what no other detector can! Smartfind indicates a target's characteristics using a two-dimensional display of target discrimination: (1) the vertical position rates the target according to size/conductivity, and (2) the horizontal position rates the target's resemblance to ferrous characteristics. With Smartfind you have the most accurate discriminating system in the world. More targets! More accuracy!

The Explorers are powered by a new slim-line drop in battery system that accepts alkaline or Minelab's new Smart Charge System. This dramatic design is the world's first detector system using Nickel Metal Hydride rechargeable batteries (supplied with the XS, available as an optional extra with the S). Recharge them at any time, regardless of use time, Smart Charger will sense when the batteries are at full charge and automatically switch off.


EXPLORER XS & S

The benchmark for Coin and Treasure Hunting detectors is about to change with the introduction of the new Minelab Explorer. Operating on a totally new system call Full Band Spectrum (FBS), this new technology transmits up to 28 frequencies simultaneously, ranging from 1.5 kHz to 100 kHz, improving both depth and accuracy of discrimination. For the first time ever, here is a detector with 2-D Identification, which means that targets are now identified by not only conductivity but as well its ferrous content. There are two models, the Explorer S and the Explorer XS. Both detectors use the new Smartfind™ two-dimensional discrimination system and have equal depth. The Explorer XS however has a number of more advanced features which allows the operator to personalize the discrimination pattern to their requirements.

Minelab Explorer XS and Explorer S Multiple Frequency Detectors

By increasing the number and the range of frequencies being transmitted (the Explorer operates between the frequencies 1.5kHz to 100kHz), there has been a marked improvement in both the depth and accuracy of discrimination. This means that the Explorer can now detect those very deep targets which have been overlooked until now. All those productive areas you have detected previously, done well and found all that was there in shallow depths, can now be re-detected to find the deeper coins which were missed previously.

An added advantage of increasing the number of frequencies being transmitted is the increased accuracy of target identification. The more frequencies sampling the target, the more information returned for processing and the more precisely the detector is able to accurately identify the target. For the technically minded, Full Band Spectrum ( F.B.S.) has meant that the resolution or the divisions of measurement, the Explorer is able to make of a target signal has gone from approximately 8000 out to a massive 65000, a huge increase of information. They're New! They're Different! The new Minelab Explorers are the most technologically advanced detectors ever produced!

Minelab's powerful, high-performance Explorer series sets the new standard in metal detecting technology. Minelab's latest, exclusive Full Band Spectrum (FBS) technology features 28 simultaneous operating frequencies from 1.5kHz to 100kHz. Superior FBS technology means a wider variety of more desirable targets, incredible depth and more target information in your hands to help you find what you've been missing with other detectors!

Minelab Explorer Xs Programs Online

Put the power of the Explorer to work! Start hunting within seconds of turning on the Explorer XS. Use Quickstart factory presets or adjust individual functions, sensitivity, volume, discrimination, pinpoint, etc., just by pushing a button, it's easy! In Advanced mode the combinations are almost endless, resulting in the world's most advanced metal detector!

The deep penetrating submersible 10-inch all-weather search coil has its concealed cable running inside the fully adjustable square-section shaft. Just one of the innovative new features of this superbly crafted, rugged, yet sleek all new detector.

Minelab's Explorers are an impressive combination of breakthrough technology and ease of use.

The dynamic fully integrated control panel incorporates breakthrough technology with a full function Coordinate Target Identification (CTI) digital display system featuring Minelab's exclusive Smartfind.

Minelab Explorer Xs Programs

Smartfind does what no other detector can! Smartfind indicates a target's characteristics using a two-dimensional display of target discrimination: (1) the vertical position rates the target according to size/conductivity, and (2) the horizontal position rates the target's resemblance to ferrous characteristics. With Smartfind you have the most accurate discriminating system in the world. More targets! More accuracy!

Minelab Explorer 2

The Explorers are powered by a new slim-line drop in battery system that accepts alkaline or Minelab's new Smart Charge System. This dramatic design is the world's first detector system using Nickel Metal Hydride rechargeable batteries (supplied with the XS, available as an optional extra with the S). Recharge them at any time, regardless of use time, Smart Charger will sense when the batteries are at full charge and automatically switch off.





Comments are closed.