Sony Mdr 7506 Eq Settings

As someone who is quite an audiophile – who just doesn’t enjoy listening to music, but also plays several instruments – I was surprised when I stumbled upon an article at Max OS X Hints claiming what the “Perfect” EQ settings are.

What the article failed to realize is that such settings won’t provide great sound at all, instead they’ll actually reduce the quality, and cause something known as clipping – thus decreasing your total listening experience.

Quite frankly, the only reason you think you need such settings is you’re either using subpar headphones, don’t have a high-quality speaker setup, or just plain don’t care. But seriously – why would you do that to yourself!!?

Sony Mdr 7506 Eq Settings -

This is what Mac OS X Hints shows as the “perfect” setting:

The Sony MDR-7506 headphones aren’t insanely comfortable but they get the job done. The Sony MDR-7506 fits snugly in a bag next to your other gear. Sony made these for audio production, and they’re good at what they do. The MDR-7506 headphones have a plastic build with a are over-ear cans meant for production.

  1. The reference quality sound of the MDR 7506 makes them great for studio use or if you like sound that is on the more accurate side. The compact, closed back.
  2. Sony MDR-7506 measured Impedance magnitude (Ω), and phase angle versus frequency. (R&S UPL; +90º is capacitive, -90º is inductive.) Measured impedance is about 80 Ω, with a maximum of 113 Ω at 64 Hz and minima of about 76 Ω at 1 kHz and 7 kHz. Phase angle varies from -13.8º at 33.1 Hz, +10º at 123.5 Hz to -17.1º at 20 kHz.
  3. Sony MDR7506 Professional Stereo Headphones are ideal for sound monitoring in recording studios, radio, film production, video, electronic news gathering - and virtually any application where high quality sound is required. The closed-ear design MDR-7506 is outrageously popular in pro and home recording studios.

How absurd! They’ve got to be kidding me..

So you ask, “What really is the best EQ setting?”

Well, you have to understand the EQ is a piece of software which increases or decreases a particular frequency – the optimal EQ setting should always be “Flat.” You don’t really want to distort your music, plus you have to remember – when you change the EQ you’re no longer listening to the music as recorded on the master recording.

But – if you want to get a little more out of your sound, let me explain to you what all those numbers and sliders on your EQ really mean, and do..

All those numbers and sliders – they correspond to different audio frequencies and wavelenghts (Duuuh! Soo?!).

Well, this is what they mean:

  • 32 Hz: This is the lowest frequency selection on the EQ. This sits in the lowest of low bass frequencies. This is where subwoofer information resides in songs (such as kick drums and bass instruments). A majority of speaker systems on the market can’t even reproduce this frequency – the only way you can hear this frequency is with a good dedicated amplifier with a high-quality subwoofer, or with some premium IEMs.
  • 64 Hz: This second bass frequency starts to become audible on decent speakers or subwoofers. Again, mostly bass drums and bass instruments will reside in this region.
  • 125 Hz: Many small speakers, such as in your laptop, can just about handle this frequency for bass information. In other words, if you turn it up on most systems, you’ll hear more bottom/bass in your mix.
  • 250 Hz: This is still considered low-end, but more of the “woofy” sound of bass and drum sounds. Guitars and pianos will have a large amount of low end in this frequency range.
  • 500 Hz: Now were approaching midrange frequencies, but still some of the low end of vocals and the mids of bass instruments sit here in a mix.
  • 1K: This is now low midrange of most instruments such as guitars, pianos, snare drums, etc.
  • 2K: The 2K frequency can boost or cut the “nasal” sound of your music, in the range your voice makes when you hold your nose and talk.
  • 4K: 4K is the upper mid range that many electric guitars sit in, as well as a large portion of many instruments.
  • 8K: This is getting into the high end, where the majority of cymbals and hi-hats are, as well as upper range of synths, pianos and guitars. Many vocals have a lot of information in this range.
  • 16K: Theoretically, us humans can hear just above 20K, so this is true high end. If you crank this up, your songs will get ‘sizzly’. This is the top of high end on the iTunes equalizer.

By the way, I hope you know – you’ll never get that “perfect” sound you want on a lot of speaker and stereo configurations, on your laptop, or even on your desktop – so just stop trying!

You can only get that “perfect” sound with a high-quality speaker setup (one which has its own dedicated amps for its speakers/tweeters, and the subwoofer), or you can also get that “perfect” sound with a set of premium IEMs.

And with these, if you feel like the sound is empty, and/or you don’t like having your EQ set as “Flat” – you can adjust your settings slightly, to be “engineered.'

So, if you want to perfectly engineer your sound to be just right – I have researched, tested, and tried everything on all sorts of equipment, with all varieties of music.

In the end, this turned out to be the true “Perfect” EQ setting:

Deals of sony mdr 7506

Yes, even with this setting – you will have PLENTY of bass (on most decent IEMs, and all premium IEMs, as well as all high-quality sound systems).

But if that configuration just isn’t enough for you, you can try an alternate ”Boosted“ EQ – to boost both the bass and treble while raising the mids slightly, which can be seen below:


NOTE: If you’re a Mac OS X user, you can add/install the above two EQ’s by downloading the file ”EQs-by-iamziyad.dmg.“ Also, make sure you have Sound Enhancer and Sound Check disabled in iTunes.

I have found either one of the two above settings to be optimal while using iTunes with premium IEMs, and also with high-quality audio equipment.

However, when it comes to an iPod – I recommend you to keep the EQ on ”Flat“ or ”Off.“ Also, if you’re not using a high-quality sound system, or if you’re using a laptop, those cheap Apple iPod headphones, etc. – I suggest you do the same. You don’t want to have your music clip while listening to it, or worse – risk blowing out your speakers!

Sony Mdr 7506 For Gaming

Ultimately, you can only do so much with software – in the end, it’s the hardware which truly makes the difference!

Sony Mdr 7506 Eq Settings User

If you really want to hear your music – my kind suggestion to you is to go out and buy yourself a pair of IEMs, if you already don’t own a pair.

But don’t worry – you don’t have a fat wallet to have ”phat“ sound.

So now you wonder; ”What are the best IEMs?“ and 'How much do an entry-level, and premium pair of IEMs cost?” and, “Which kind is the best for me?

Well, that’s simple. Depending on the quality you’re after, you can get IEMs that drop into various price, and quality ranges which go from entry-level to medium quality at $20 to $75; premium to professional quality at $75 to $200; and high-performance professional quality that runs upwards of $500 to $1500.

So let me break it down for you..

A decent pair of IEMs,which would be the equivalent of owning a ‘Honda’, a 'Toyota’, or a 'Nissan’ – are available rather affordably, costing anywhere between $20 to $75 (such as the Denon AH-C252K, Klipsch S2, Klipsch S4, Sony MDR-EX 81LP, and the Maximo iMetal iM590). Entry-level to medium IEMs usually deliver audio quality that would be described as “sounding good” to the untrained ear, and are relatively comfortable – but most of them don’t have the same build quality as their more expensive counterparts, thus usually not lasting as long.

To be straight-forward and honest – if you really want the most for your money, and the best out of your music then I recommend going for a pair of premium IEMs which will run you anywhere between $75 and $200.


Such IEMs would be like owning a luxury, and performance model of a 'BMW’, 'Mercedes’, or a 'Bentley’ in the world of cars.

One of the best parts about premium IEMs is you get amazing clarity, that perfect bass you’re always after, clear mids, and a tuned treble. Another absolutely wonderful part about them is you can also listen to your music at relatively low volumes and still hear everything – as almost all premium IEMs offer excellent noise isolation technology. Aside from that most companies, usually provide a no-questions-asked extended warranty (as a commitment to stand beside the build quality of their product).

In the $75 to $200 range we have only some of the best. In this class, you can get some amazing quality premium IEMs (such as the V-Moda Remix Remote, Tour Beats by Dre, Denon AH-C700, Atrio M5, Shure E3c, and the Etymotics’ ER-6i). Premium to professional IEMs provide excellent audio quality with full bass and treble coverage, without “muddying” the mids, all while still being the most comfortable.

Although, if you’re feeling really brave and want to go all out and splurge ($500 to $1500) – you can get a pair of what many audiophiles, and music artists would consider to be the 'Bugatti Veyron’ or the 'McLaren F1’ of IEMS which can have as many as 6 speakers per ear, and fit your ears precisely – as they’re custom-made and molded from your own ears (available from Ultimate Ears and Livewire).

I bet you’re saying, “Ooh, woooow!” right now – that’s what I said the first time I saw them too!

I know, those custom-made IEMs are just ridiculously expensive! You honestly don’t need anything like that unless you’re going to be standing on stage in front of 250,000 screaming and roaring fans – so just forgetta 'bout it!

Just trust me, with a properly configured EQ and a good pair of IEMs..

You will rediscover all of your music – you will enjoy it in peace. You will hear things you have never heard or noticed before.

You won’t just enjoy your music more, but you will forget about even using the EQ – you will be shocked by how much you will be able to hear every beat, every frequency, all that bass, and all that treble!

The best part is, you will be able to do this all without even turning up the volume that high, or playing with your EQ – distorting the sound.

Instead you’ll be immersed in a truly beautiful listening experience.

Bottom Line: If want to enjoy your music – do it the right way!

Please enable JavaScript to view the comments powered by comments powered by Disqus
  1. likeatolarboss liked this
  2. internationalorange liked this
  3. koolinus liked this
  4. bigmelwalter reblogged this from ziyadnazem
  5. bigmelwalter liked this
  6. vvla liked this
  7. vixiana liked this
  8. easyexit liked this
  9. carsian liked this
  10. simple-mindedpleasures liked this
  11. railly-r liked this
  12. bwdphoto reblogged this from ziyadnazem
  13. 009px liked this
  14. alfestone reblogged this from ziyadnazem
  15. r3volutionarythoughts liked this
  16. seetheuntold liked this
  17. bwdphoto liked this
  18. redwerkz liked this
  19. animenculture liked this
  20. bogthing liked this
  21. jinqle liked this
  22. wingshark liked this
  23. fuzzyankles reblogged this from ziyadnazem
  24. teatb liked this
  25. lesbieee reblogged this from ziyadnazem
  26. borgonaut liked this
  27. pigletdiary liked this
  28. thereforereblog liked this
  29. missng liked this
  30. jdwasabi liked this
  31. thecrunkstables liked this
  32. taughtmetobloom liked this
  33. sandiego619ca liked this
  34. seven72 liked this
  35. johnaaay-blog liked this
  36. thebiopsy liked this
  37. mrtoutlemonde liked this
  38. higurashi-moratorium liked this
  39. athousandwatts reblogged this from ziyadnazem
  40. athousandwatts liked this
  41. ziyadnazem posted this

Sony Mdr 7506 Best Price

Sony Mdr 7506 Eq Settings

Sony Mdr 7506 Eq Settings Review

Sony mdr 7506 review

KNOXVILLE, TN — Waves Audio, a leading provider of digital signal processing solutions and digital music production tools, announces an update to the Waves Nx Virtual Mix Room plugin – a new headphone EQ calibration feature. Added in response to popular demand, this new feature allows users to select a correction EQ curve for specific popular headphone models.

Sony Mdr 7506 Specs

Nx Virtual Mix Room is a virtual monitoring plugin that recreates the three-dimensional acoustics of a professionally treated mix room on any set of headphones. This allows you to hear on headphones the same depth and panoramic stereo image you would hear from speakers in a physical room, enabling you to properly judge how your headphone mixes will translate to speakers.

Based on precision headphone measurement data provided by, the Nx plugin’s new EQ calibration curves are designed to balance out any extreme features in your headphone’s frequency response, correcting them toward a common frequency balance. This provides a more transparent starting point for monitoring and mixing.

Sony Mdr 7506 Driver

The following headphone models are currently supported by Nx:
Audeze EL-8 (Closed-Back)
Audeze iSINE 20
Audeze SINE
Audio-Technica ATH-M50x
AKG K-702
Beyerdynamic DT-880 (250 ohm)
Beyerdynamic DT-990 (250 ohm)
Sennheiser HD-280 Pro
Sennheiser HD-600
Sennheiser HD-800
Shure SRH-440
Sony MDR-7506

Using Nx Virtual Mix Room with EQ calibration, users can now mix and monitor on headphones with greater confidence than ever, experiencing precise, reliable high-end sound in the studio, at home or on the road.